Stephano2005

I've started and have finished most of the stuff for Volume 5 box. I hope to complete it by the end of the year. Also, It's nice to hear that there's more evidence that third kits might officially happen.

I assumed white is the main color since it was mentioned first.

Is it okay if I make this?

Heated Jet Squelcher (I realized that Guzzling E-Liter 4K better fit the criteria for Sheldon's Classics than the Retired Jet Squelcher. So now it's a normal SP and pairs with the Cooled Dualie Squelchers.)

Updated:

Dairy Goo Tuber (It was hard for me to think of something for Goo Tuber and I wasn't really happy with results of the initial idea I had for it. After returning to it after a while the splotches on the weapon from the initial idea made me think of the spots on a cow, which lead me to this. Also the original name for this was Moo Tuber which I thought was goofy.)

Guzzling E-Liter 4K (The weapon is stylized to look like the E-Liter 3K. The word Guzzling felt thematic to the weapon as well as the fact that the E-Liter 3K consumed more ink.)

Guzzling E-Liter 4K Scope (Just like the unscoped version it's stylized to look like the E-Liter 3K. The difference being the scope which is colored to look like the 3K Scope.)

Fueled Explosher (The weapon is colored and adjusted to look like a plastic red jerrycan or gas can. The change to the shutter portion to look like discolored metal was for fun and made it look less clean.)

The final remaining Splatoon weapon stuffs:

Safety Douser Dualies FF (A variant of the Douser Dualies FF. Parts of the body, the main nozzle, and the can are meant to be a fluorescent orange. The small moving nozzle is meant to be flourescent yellow/green and the piece of tape on the grip is now meant to look like reflective red hexagonal tape.)

Pro Heavy Edit Splatling (A variant of the Heavy Edit Splatling. The ammo box is meant to be made out of leather with some golden parts and parts of the main body are now a cyan color.)

The remaining Splatoon Weapon stuff #2:

Antique Wellstring V (A variant of the Wellstring V. The main body is a brown color, the handle is red, and the caps of the black rubber bits are white.)

Replica Splattershot Jr. (A variant of the Splatttershot Jr. meant to be replica of the early models of Splattershot Jr. mentioned in The Art of Splatoon. The main body is made out of metal, the purple rubber parts are instead solid black plastic, the hinge is held in by bolts, and the trigger is straight instead of curved. The mark on side of the weapon is painted on instead of being a sticker. It also has less extruded details on the body.)

The remaining Splatoon Weapon stuffs #1:

My computer seems to no longer be having issues but I'm not certain. So Volume 5 is on an indefinite hiatus until I am. Until then, I think I'm going to do some of the weapons I skipped to get used to things again.

Also the Box(s) have the textures/models if anyone wants them.

Volume 5 will take longer than planned. Computer complications.

Sheldon's Picks Volume 4 Box concept

*This is the last of the 56 weapons I had planned on doing and currently have done. I may make something for the remaining 7 if I feel like it but at the moment this is all that I planned on doing.

Retired Jet Squelcher

Cooled Dualie Squelchers

Emberz Splattershot Nova

Colorful Clash Blaster

Splatoon Weapon Stuffs Finale*:

Emberz Splat Roller

Kensa Rapid Blaster

Hydrated Carbon Roller

Rigid Dread Wringer

Continuation of Splatoon weapon stuff:

Alternate angle:

Tempered Dynamo Roller (An existing variant of the Dynamo Roller. The grand majority of the metal body is changed to look tempered. This includes various different colors notably shade(s) of purple and blue.)

Bubblegum Decavitator (A variant of the Mint Decavitator. The parts that were previously blue are pink and parts that were previously white are a slightly pink color. The bristles are pink and white. The clear plastic is slightly pink) Bubblegum is not the most original idea for a third Decav but it's the most obvious choice.

Recycled Brella 24 Mk III (A variant of the Recycled Brella 24. The bamboo portion of the weapon is a blue-ish green color along with the ribbon on the tip of the weapon. The metal portion of the body is more silver. The cap at on tip of the weapon is pink. The canopy keeps its Cuttlegear branding but instead of being gold colored it's silver colored.)

Sudsy Bloblobber (A variant of the Bloblobber. The sides of the wepaon are a light blue color and white with a pattern of bubbles on it. The deco branding is yellow and orange. There is a sticker depicting a mound of bubbles at the front end of the weapon, The cylindrical bit on the front of the is now orange.)

An additional entry of Splatoon weapon stuffs:

Emberz REEF-LUX 450 (An Emberz variant of the REEF-LUX 450. The handle and the wheels are red, the limbs are green, and the handle along with the parts where the other shots would be fired from and part of the end of the weapon is blue. The string is black and there's an Emberz logo on the side of the weapon which would be based off of the users ink color.)

Wasabi Splattershot (An existing variant of the Splattershot with some changes due to the different design in Splatoon 3. The Neo logo is no longer a sticker and is now an emblem affixed to the side of the bottle/holder. The holder and the handle portion of the weapon is a darker green. The grip, the cap of the bottle, and the piece that connects to the barrel is a lighter green. The tip of the gun and the trigger are yellow.)

Hydra Splatling AA (A variant of the Hydra Splatling. The hose is white. The spring is yellow. The hydrant portion of the body is blue. The other portion of the body is red. The handle is orange.) Hydra was a little difficult for me to think of something for but the name and the color of the hydrant portion is a reference to AA class fire hydrants which have a bigger capacity (1500+ gpm) than Red/C class hydrants (<500 gpm).

Barazushi Tri-Stringer (A Barazushi variant of the Tri-Stringer. The caps are orange. The metal is darker. The limbs have a cork cover with the Barazushi symbol on it.)

More Splatoon Weapon stuff (again):

Alternate angle:

Permanent Inkbrush (An existing variant of the Inkbrush. As all previous versions the body of the weapon is red. Additionally the bristles are now white and the ferrule is now gold.)

Kensa Splat Dualies (An existing variant of the Splat Dualies. Like all Kensa variants it primarily consists of black and white. However I decided to change it a little to be more in line with the other Kensa weapons I've posted. As such the parts that are white are more pronounced than they are with the S2 version, and the trigger is now red. Besides that pretty much everything else is the exact same as the S2 version.)

Foil Brella (A Foil variant of the Splat Brella. It is HEAVILY based off of an unused design for Splat Brella in the Splatoon 3 art book. The Canopy is primarily red and white, there's a mixture of both Sorella and Foil branding but it is meant to primarily feature Foil. The sides of the canopy has the Foil logo and name. The center of the canopy has the Sorella Seahorse and logo, as well as an alternate Foil logo. In between the sides and center of the canopy it is colored based off of user's ink color and there are small windows. Moving to the body of the weapon, the colors are inverted from the vanilla Brella and the shaft and runner are metal. The wrist strap is a metallic red and the shaft has a Foil sticker.)

Bamboozler 14 Mk III (An existing variant of the Bamboozler. The body is a bright brown color, metal parts are gold, and the weapon has the cuttlegear sticker.)

Splatoon Weapon stuffs (continued):

Kensa Splatterscope (An existing variant of the Splatterscope. It's visually the exact same as the Kensa Charger except with a scope attached. The main part of which is white with red tips where the lenses connect. The knobs and the piece that holds and connects the scope to the weapon is black.)

Grim Range Blaster (An existing variant of the Range Blaster, with some differences due to the new design in S3. The flames on the weapon are now green and the can at the back of the weapon is purely black with some lines on it to show ink color. The new design in S3 changed the tubes on the side of the weapon to be much larger, so fully recoloring them could look a little strange, so while the red and blue colors are kept it's only through thin lines on the seams of the black tubing on the sides of the weapon.)

Snipwriter HB (A variant of the Snipewriter 5H. The color of the pencil is now more yellow and many of the metallic parts are now green. the parts that connect the handle to the pencil as well as the bit before the end of the barrel is now metal. The handle is black and the rubber(?) piece near the bottom of it is now colored to resemble a rubber band. The pencil overall and the name are meant to reference a Ticonderoga pencil.)

Rose Painbrush (A variant of the Painbrush. The main body is meant to resemble rose gold. The handle is a brighter wood and the piece that connects it to the body is now white. Additionally the bristles are more of a tan color.)

Kensa Charger (An existing variant of the Splat Charger with some differences due to the design change in S3. The Kensa clip and it's general location are kept from the S2 version. The bottle cap and the added sights are red. Everything else is either black and white. The bottle has the kensa text on it.)

Splatoon Weapons stuff (once again):

my posts are. On the subject of vague, I feel like I haven't been forward about what these posts are. They are model/texture edits I did and rendered in Blender. Just something for fun. They are not mods. While technically they could be as there isn't really much I could see being impossible to...

Aerospray PG (Existing variant of the Aerospray. The majority of the weapon now resembles hammered bronze or copper. With a few golden bits here and there as well as some parts retaining their silver color. Additionally there Ammo Knights logo on the weapon's tank is pressed into it and colored white instead of being painted or printed on like the other variants.)

Heavy Splatling Remix (An existing variant of the Heavy Splatling. However adjusted to fit the new chripy chips logo and the new design of the Heavy Splatling. In previous iterations the heavy remix uses the original Splatoon 1 assets or at least the S1 design. With this iteration the colors (pink, purple, yellow, and blue) are a little different and the purple from previous iterations is now green. Additionally, where the colors are on the weapon is a little different, but I tried to keep things close in some cases while still making enough changes for it to be different. Besides that the ABXY/ChirpyChips sticker is updated with the current logo as well as having a little added texture to it and the placement is now at the front of the bottle.)

N-ZAP '83 (An existing variant of the N-ZAP. Many parts of the weapon are changed to a darker red color as well as a kind of dark cream color in reference to the Famicom. This is also the case with added start/select and B/A buttons onto the side of the weapon and the name of the weapon itself.) This was another pretty easy one to do as once again the model and textures are close to the exact same from S2 and S3.

S-BLAST '90 (A variant of the S-BLAST. The name, along with the color of the tip of the weapon as well as the colors of the buttons and switch on the top of the weapon is in reference to the Super Famicom. The tip of the weapon is green. The largest rounded button to the right is blue. The center button is red. And the switch to the left is yellow. The sight is a lighter color of grey. And finally the text and logo on the side of the weapon matches with the Japanese variant of the Super Scope.)

Back to Splatoon Weapon stuffs.

Updated the background for consistency. Altered somethings to make the red bits a bit more clearly red, such as making certain parts less metalic. As well as making certain white parts a little bit of a brighter white.

Updated:

Classic Tri-Slosher (It's the S1/S2 design for Tri-Slosher. It's got a darker green main body and lighter green handle which are connected by two red parts, and there's the second the black metal handle. Since the design was changed in S3, I imagine that the supply of new condition Tri-Sloshers aren't easy to come by. So the slosher shows a little wear on the handles, being a little more lighter in color where it would've been held. The parts of the lip of the bucket closer to the ground is also a little rougher to show wear as well. Finally the price sticker shows that it costed 7500 Cash/G, which also meant to date the weapon.)

Emberz Splatana Wiper (Emberz variant of the Splatana Wiper. The Handle and a few other small pieces on the weapon are blue. The majority of the tubing on the weapon is green. The large piece that the sponge connects to is red as well as a few other small pieces on the weapon are red. On the jagged tubing to the right of the handle [in the weapon's normal orientation] there's three emberz logos, one red, one green, and one blue. There's one last Emberz logo which matches the ink color on the large red piece of the weapon.) For those who read these this is half-way through the weapons I plan on doing.

Partial Splatoon Weapon stuffs:

Updated Background for consistency. Changed the colors and roughness of parts of the weapon to better fit the look I wanted. Notably an additional part of the main body is now green, the neo logo on the body of the weapon is wight to be clearer to see. The Emberz Logo is updated for consistency and the blue part is less metallic and rough.

Updated the background for consistency. Changed the colors of certain parts of the weapon to better fit with how I wanted it to look. The sticker on the main body from the other two variants is back. The slider piece on the main body as well as the stock at the back of the weapon are now red. The slider piece on the handle is now black instead of red. The Emberz logo is now on barrel tip.

Updated the background for consistency.

Updated the background for consistency.

Updated:

Updated background and ink color for consistency.

Updated:

Background updated and sticker added for consistency.

Background updated for consistency. Colors adjusted to be closer to the original Berry Pro.

Updated:

All as a hypothetical "What if the majority of the weapons got third kits/variants?" These variants would be split into 8 collections of 7 weapons, 4 Sheldon's Picks, 1 Sheldon's Classics (returning S1 exclusives and based off of older designs), 1 Kensa Rerun, 1 Emberz, and 1 everything else.

do so. I have no modding experience. And while I do have the correct hardware to mod, I don't feel comfortable doing so. Finally I will end on that I only currently plan to do 56 weapons (counting scoped and non-scoped as one).