This also mostly works for HDMI sources like MiSTer or Analogue - but functions that dynamically affect image scaling like DV1 need to be disabled.
23.06.2025 15:17
👍 14
🔁 0
💬 1
📌 0
This also mostly works for HDMI sources like MiSTer or Analogue - but functions that dynamically affect image scaling like DV1 need to be disabled.
This also mostly works for HDMI sources like MiSTer or Analogue - but functions that dynamically affect image scaling like DV1 need to be disabled.
Finally figured out how to get glitch free 240p <-> 480i (and 288p <-> 576i) transitions without adding lag or fake blanking the image!!
In this mode, the RT4K syncs and scans the fields exactly the same way as a CRT.
Perfect for mastering 240p Test Suite.
Source might be changing the range without updating the flag. Some devices do that to trick the receiver for some edge cases.
I think the mister must be sending a 720p signal, check your ini file
I need to get those K street lobbyists on the line.
Is this FOMO? Not necessarily. We have some reserve stock in the USA.
We also expect that this will be resolved eventually - but it is impossible to say when or how.
4/4
Suffice to say, these issues apply only to U.S.-bound shipments.
As before, service to the rest of the world will continue without interruptions and policy induced complications.
3/4
Without proper procedures in place, the risk of delays and lost packages is simply too high.
As soon as we understand how to pre-pay tariffs on behalf of the customer, we will resume shipments.
We apologize in advance for the inconvenience.
2/4
Due to lack of guidance on how tariffs will be collected starting May 2nd, we've made the difficult decision to temporarily suspend US shipments:
April 23rd - Last day for non-expedited orders
April 28th - Last day for expedited orders.
1/4
No effect since it’s shipped from Asia. You’ll have to pay the usual taxes/duties
4. USA prices will likely increase by summer if no resolution is reached.
No change in cost or transit times to the rest of the world. Shipments will continue directly to customers and resellers directly from Asia.
2/2
If no substantive changes in trade policy:
1. Next week (ending April 19th) will be the last “safe” window to order.
2. USA orders may see slower shipping times after this.
3. We are still trying to figure out exactly how everything works, and will absorb the increases for the short term.
1/2
IK+ running on MiSTer and AmigaVision, showing off how the full crop looks.
First experiments with AmigaVision and RetroTink 4K integration. Exaggerated white balance so you can see how it crops the image. Looking very promising, not a lot of wasted space on a 16:9 TV for a lot of Amiga games!
Attention -- a bug due to our recent website redesign is causing many of you to receive phantom/duplicate order confirmation emails. Please ignore them. Thank you!
thank you!!
RetroTINK-4K CE Live Now!
www.retrotink.com/product-page...
RetroTINK-4K CE in stock Sunday at 9AM Pacific Time (March 9th)!!
Shipping starts immediately from inventory, but depending on order volume, may take two to three weeks to fulfill all orders. Thank you for your patience.
www.retrotink.com/product-page...
Going to be a busy day testing!!
🌕
Moons are a terrible way to gauge aspect ratio for games, but we use them anyway!
Super Mario 64
Final Fantasy IV
Castlevania; Dracula X Chronicles
Persona 3 Portable
PlayStation Portable
Nintendo 64
#retrogaming
RetroTINK-4K
What's your favorite moon in a videogame?
Awesome dude, really glad you like it!!
Hello everyone.
I have created a specification document to standardize the female SCART mechanical mounting locations originally designed by @retrotink.com for the RT4K, and later adopted by Arthrimus in the SVS.
I will have more to say on this soon but, let me just say now, if you are looking into a proper analog video switching setup - this is the best product I've ever used and it's not even close. An absolutely masterpiece based on my testing. It's a switch from the heavens.
scalablevideoswitch.com
The kind Dr Mike Chi of @retrotink.com was gracious enough to share CAD files of the RetroTink 2X-SCART scaler so I could design a SCART-Brace.
Unfortunately I don't own a 2X-SCART, would a willing volunteer like to 3D print and test fit?
My friends, I want to leave you with a before and after comparison of the video output coming from an RGB revised 2CHIP SNES that I just serviced.
This is using GENERIC Tink settings -- No optimized sampling, no brightness/gain fixes. I want you to see what my hardware really does all on its own!
Never imagined it… that looks awesome!!
RT2X MINIs have been checked in at the warehouse and will go live on Jan 5th, 9AM PST!
Please clean your N64 carts and seat your jumper paks. 🙏🫠
www.retrotink.com/product-page...
I’d say definitely number 1.
With 2, even if you fail you can rest knowing you gave it your best shot and you know how to get another chance.
Thanks man!! What really drove me nuts was not having VGA -> 5BNC plus audio in a tidy package!
Svs is supported and svideo is the same as the svideo on the 4KPro minus the enhanced mode
