Small & Smart Dev fellow

Efinix Inc Efinix offers the Titanium, Topaz, and Trion FPGA families, which deliver power, performance, and area advantages over traditional FPGA technologies.

www.efinixinc.com/index.html

Smart Nanotubes - Gas sensor development World´s First Smell Detector Chip for the Mass Market - Up to 100 Times More Sensitive Due to Nanomaterials

www.smart-nanotubes.com

¿
#bequiet-pro-901
front fan allows for
40 mm of clearance
(up to 46.8 mm if fan is
moved upward),
making 34.9 mm RAM
fully compatible

¤
how does
#RAM (DDR)
133.35 x 34.9 x 6.62 mm
fit inside
#bequiet-pro-901

¿
If you have #two 16GB sticks:
Do not use A1/B1;
use #A2/B2.

¿
#X870-F uses #Daisy-Chain
topology, meaning slots furthest
from CPU (A2/B2) provide
best signal integrity for high-speed
#DDR5

¤
Why #A2/B2 #DIMM-slots of
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard

¿
For optimal dual-channel performance
with two RAM sticks in
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
you should use
#DIMM_A2 and
#DIMM_B2 slots.

¿
** installing
#Kingston-FURY-Beast-DDR5 -5600 -MHz -CL40-16Gb
on #DIMM_A1 of
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
** disrupts memory channel
optimization, which can lead to
** boot failures,
** instability, or
** significantly lower performance.

¤
why not install
#Kingston-FURY-Beast-DDR5 -5600 -MHz -CL40-16Gb
on #DIMM_A1 of
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard

#ξ
used slots #A2 and #B2 of
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
(the second and fourth slots from CPU)
to ensure optimal dual-channel
performance.

¤
how to install two
#Kingston-FURY-Beast-DDR5 -5600 -MHz -CL40-16Gb
on
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard

¿
To achieve full 5600 MHz speed
(which is an overclocked profile),
you may need to
enable #EXPO or #XMP profile in
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
#BIOS settings.

¿
Verify installation
by visually checking that clips are fully
closed and module seated
correctly and evenly in slot.
#ξ installed it

¿
Secure #RAM.
using firm, even pressure on
both ends of RAM module
until it clicks into place and
retaining clips snap
shut and lock automatically.

¿
Insert module.
gently placing it into slot
at a slight angle

¿
Align notch on
bottom edge of module
with raised section (key) in
DIMM slot ensur7ng it can
only be inserted in correct
orientation

¿
Align #RAM module.
Hold #Kingston-FURY memory
module by its edges, avoiding
gold contacts.

¿
Prepare the slot.
Press down on the clips at one or
both ends of the designated A2
memory slot to open them.

¿
#ASUS recommends for a single memory
module, to use A2 slot of
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
(the second slot away from CPU).

¿
Identify the primary slot of
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
#ξ did not use it
#ξ ** not recommended by #ASUS
** #Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
** memory controller limitation

¿
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
has four DIMM slots
#ξ true

¿
locate RAM slots
on
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
#ξ located

#ξ installed RAM with mobo on
#bequiet-pro-901-removable-motherboard-tray

¤
how to install
#Kingston-FURY-Beast-DDR5 -5600 -MHz -CL40-16Gb
on
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard

#Windows11 info
#ξAdapter Name: Ethernet

#ξ installed first on
#ξbequiet-pro-901-removable-motherboard-tray

#ξ had to bring LAN driver
from
#Windows10 PC to get new
#Windows11 PC to internet

¤
where is
bottom
#PCIe 4.0 x16 slot
in
#Asus-ROG-Strix-X870-F-Gaming-WiFi motherboard
#ξ located it

¿
Install card in bottom PCIe 4.0 x16 slot
XG-C100C V2 only requires an
x4 connection to operate at full speed.
#ξ installed it