Latest posts tagged with #DIYPerks on Bluesky
Passive amp & help w constructive & destructive interference (b/c you were talking in my head about this for some reason, maybe #diyperks) to force a sub pixel & pixel change only (version of h.264/265 encode) analog screen refresh like w our eyes & have better everything for less cost/energy
My DIY solder fume extractor (brown box with spinning fans and switch set to on) that is powered by the iFixit FixHub through USB-C (visible on the right). The second USB-C port on the FixHub is powering the iFixit soldering iron that's lying on a silicone mat in front of the solder fume extractor.
The back of the fume extractor with the flexible tubing attached through velcros.
The tubing can be detached and stored away in the fume extractor box (being held in place by more velcros on the other side). This shot also shows the USB-C plug for 12V power input.
The airflow vents can be folded in on each other and held in place by more velcros making the whole fume extractor easily storable by decreasing its footprint.
My finished #DIY #solderfumeextractor.
The fumes are sucked in and pushed out through the flexible tubing which I hang out of my window.
It's powered by USB-C (12V) and can handily be plugged into my @iFixit #FixHub's second USB-C output as I've integrated a […]
[Original post on mastodon.social]
A DIY solder fume extractor project in progress. The fume extractor is made from a box that has two holes with fans in them. Next to the upper fan is a button titled "LED" and two exposed wires (intended for an LED strip). Next to the lower fan is a flip switch titled "FAN" that is set to off. In focus in the picture are a male and a female barrel jack connector end with the female one being completely DIYed and held together with hot glue.
The barrel jack ends are now connected, the FAN-switch set to on and the fans are spinning 🥳
The inside of the DIY solder fume extractor. It shows two fans (the upper one is already connected to the side of the box), two switches from the back, and a lot of messy wiring (soldered connections are covered by heatshrinks).
Currently working on a DIY solder fume extractor for my new @iFixit #FixHub soldering station. As a soldering novice I'm actually quite proud of what I've done so far :)
Stay tuned for another post once I've finished the project (currently still waiting on a […]
[Original post on mastodon.social]
Transformer console PS5 en tablette pour jouer n'importe où (Tuto Video) wp.me/pVE3x-oVN
#PS5 #Playstation5 #Console #gaming #jeuxvideo #DIY #geek #bricolage #tutorial #howto #tablet #electronics #gamer #maxigadget #diyperks
YouTube Video
Es gibt tolle Ideen, was man mit irreparablen Laptops noch alles anfangen kann
There are some great ideas for what you can do with irreparable laptops
www.youtube.com/watch?v=WLP_...
#labdoo #diyperks #upcycling #ideas #laptop
