#Instrumentation

@insttools.bsky.social

4 hours ago

Speed of Actuators | Hydraulic and Pneumatic Actuators Fastest actuation is provided by hydraulic, pneumatic, and solenoid actuators. Depends on requirement of Speed of Actuators we choose the type of actuator.

Speed of Actuators #Instrumentation #InstrumentationTools instrumentationtools.com/speed-of-pow...

0 0 0 0

@teluguautomation.bsky.social

1 day ago

How to Avoid Process Downtime ? Industrial process control is everywhere. Sometimes it is dangerous or complex. In other cases it may be relatively mundane. In all industrial processes, though, maintaining operation is key. Stakeholders rely on the process output and look to the designers, engineers, and operators to deliver, in many cases, uninterrupted performance. The world is a place of many uncertainties, some of which can impact your process in undesirable ways. While it's not practical to design or build to accommodate every possible adverse event, application of experience and good judgement in a few areas may significantly shorten the list of things that can

How to Avoid Process Downtime ? #Instrumentation #InstrumentationTools instrumentationtools.com/how-to-avoid...

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

2 days ago

Ball Valve Material Selection - Instrumentation Tools Piping class shall be used as a reference to select ball valve material with its related pressure and temperature ratings.

Ball Valve Material Selection #Instrumentation #InstrumentationTools instrumentationtools.com/ball-valve-m...

0 0 0 0

@teluguautomation.bsky.social

3 days ago

Pressure Transmitter Preventive Maintenance (PM) - Inst Tools In this article, you will learn the pressure transmitter and sensor calibration and preventive maintenance (PM) procedures.

Pressure Transmitter Preventive Maintenance #Instrumentation #InstrumentationTools instrumentationtools.com/pressure-tra...

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

4 days ago

Contact Type Guided Wave Radar Level Transmitter Working Principle Guided wave radar (GWR) is also called time domain reflectometry (TDR) or micro-impulse radar (MIR). Basic principle In a Guided Wave Radar installation, the GWR is mounted on the top of the tank or chamber, and the probe usually extends to the full depth of the vessel. A low energy pulse of microwaves, travelling at the speed of light, is sent down the probe. At the point of the liquid level (air / water interface) on the probe, a significant proportion of the microwave energy is reflected back up the probe to the transmitter. The transmitter measures the time delay

Contact Type Guided Wave Radar Level Transmitter Working Principle #Instrumentation #InstrumentationTools instrumentationtools.com/contact-type...

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

5 days ago

Thermocouple / RTD Calculator Temperature Calculator software is based on the conversion tables and calculation as per ITS-90. This software is used to convert the Emf (mV)/Ohms generated by thermocouple & RTD to the temper…

Thermocouple / RTD Calculator #Instrumentation #InstTools instrumentationtools.com/thermocouple...

0 0 0 0

@teluguautomation.bsky.social

5 days ago

How to Create Calibration Records? The calibration record is the proof that the instrument was calibrated on the mentioned date & time. Learn how to create it.

How to Create Calibration Records? #Instrumentation #InstrumentationTools instrumentationtools.com/how-to-creat...

0 0 0 0

Peter Pihlmann Pedersen

@ppp.one

6 days ago

Open Positions

📢 Fully funded PhD positions @ ETH Zürich, Queloz Group (more info: queloz-group.ethz.ch/the-group/op...)

#astronomy #phd #exoplanets #instrumentation

0 0 0 0

@teluguautomation.bsky.social

6 days ago

PID Tuning Recommendations based on Process Dynamics Knowing which control actions to focus on first is a matter of characterizing the process (identifying whether it is self-regulating, integrating, runaway, noisy, has lag or dead time, or any combi…

PID Tuning Recommendations based on Process Dynamics #Instrumentation #InstTools instrumentationtools.com/pid-tuning-r...

1 0 0 0

Instrumentation Tools

@insttools.bsky.social

1 week ago

Inductively Coupled Wire Guided Float Detectors Inductively Coupled Wire Guided Float Detectors is an old method of level measurement used in the fuel storage industry. This system has a wire that is fixed at both the top and bottom of the tank …

Inductively Coupled Wire Guided Float Detectors #Instrumentation #InstrumentationTools instrumentationtools.com/inductively-...

0 0 0 0

@teluguautomation.bsky.social

1 week ago

JT Valve Working Principle JT valve works on the principle that when the pressure of a gas/Liquid changes, its temperature also changes. The Joule–Thomson effect describes the temperature change of a gas or liquid when it is…

JT Valve Working Principle #Instrumentation #InstrumentationTools instrumentationtools.com/jt-valve-wor...

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

1 week ago

Calibration of Weight using the ABBA Method In this article, you will learn the calibration procedure of weight using the ABBA method.

Calibration of Weight using the ABBA Method #Instrumentation #InstrumentationTools instrumentationtools.com/calibration-...

0 0 0 0

@teluguautomation.bsky.social

1 week ago

Basics of Cable Shields shield is a metallic covering enclosing an insulated conductor or group of conductors. Though sometimes similar in appearance, shields for electronic and power cables perform very different functio…

Basics of Cable Shields #Instrumentation #InstrumentationTools instrumentationtools.com/basics-cable...

0 0 0 0

AIP Publishing

@aip-publishing.bsky.social

1 week ago

Lets celebrate all the wonderful achievements our #Instrumentation & #Analysis portfolio made in 2025! Thank you to our authors, reviewers, and readers — we can't do it without YOU! 🙌

🔗 https://aippub.org/4aHyMYt

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

1 week ago

Pressure to Current (P/I) Converter Principle We can construct a pressure to current converter using a Flapper- Nozzle arrangement , Bellows and a Linear Variable Differential Transformer (LVDT) circuit. Input pressure is given to Flapper-Nozz…

Pressure to Current (P/I) Converter Principle #Instrumentation #InstrumentationTools instrumentationtools.com/pressure-cur...

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

1 week ago

What is Burner Management System (BMS)? A Burner Management System or BMS is a safety system used to assure safe start-up, operation and shut down of process burners. The BMS can be used in industries like Oil and Gas, Power Generation, …

What is Burner Management System (BMS)? #Instrumentation #InstTools instrumentationtools.com/what-is-a-bu...

0 0 0 0

@teluguautomation.bsky.social

1 week ago

Pressure Transmitters Leg Compensation Technique Alternative to Pressure Transmitters Leg Compensation An alternative to using a compensating leg to subtract gas pressure inside an enclosed vessel is to simply use a second pressure transmitter an…

Pressure Transmitters Leg Compensation Technique #Instrumentation #InstrumentationTools instrumentationtools.com/alternative-...

0 0 0 0

@teluguautomation.bsky.social

1 week ago

Pre-commissioning or Commissioning Activities What are the things to be checked carefully during pre-commissioning or commissioning activities for instrument engineer? Pre-commissioning or Commissioning Activities Before a plant or facility is…

Pre-commissioning or Commissioning Activities #Instrumentation #InstTools instrumentationtools.com/pre-commissi...

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

2 weeks ago

Absolute Pressure Gauges Principle These instruments are used where pressures are to be measured independent of the natural fluctuations in atmospheric pressure. As a general rule all the known types of element and measuring princip…

Absolute Pressure Gauges Principle #Instrumentation #InstrumentationTools instrumentationtools.com/absolute-pre...

0 0 0 0

@teluguautomation.bsky.social

2 weeks ago

Switch Types and Common Terminology Overview Learn about switch basics, including the pole and throws naming convention, normally open (NO) and normally closed (NC) terminology, different switch topologies, and types of switches such…

Switch Types and Common Terminology #Instrumentation #InstrumentationTools instrumentationtools.com/switch-types...

0 0 0 0

@teluguautomation.bsky.social

2 weeks ago

Simple PLC Project – Garden Water Pump | తెలుగు Tutorial Simple PLC Project explained in Telugu. Control a garden water pump using timer-based logic with RUN and STOP indication lights. Perfect for PLC beginners.👇...

Simple PLC Project – Garden Water Pump | తెలుగు Tutorial
Click here to watch 👉 www.youtube.com/watch?v=Gw0O...
.

#plc #electrical #instrumentation

0 0 0 0

Instrumentation Tools

@insttools.bsky.social

2 weeks ago

What is a Disc Valve ? Disc valves (often referred to as eccentric disk valves, or as high-performance butterfly valves) are a variation on the butterfly design intended to improve seat shut-off. The disc’s center is off…

What is a Disc Valve ? #Instrumentation #InstrumentationTools instrumentationtools.com/disk-valves

0 0 0 0

Supernovae

@supernovae.activitypub.awakari.com.ap.brid.gy

2 weeks ago

Original post on astrobites.org

Caught Doping: Going to Extreme Measures to Detect Ultraviolet Photons No, it’s not illegal! Astronomers have developed a technique called delta-doping to make detectors that are much better at d...

#Daily #Paper #Summaries #astronomical #instrumentation #CCD […]

[Original post on astrobites.org]