#MeltedHeartKeyring by @3DomSculpts in @MatterHackers #MHQuantum silver purple, and of course, more like #BleedingHearts @Proto_pasta #BloodOfMyEnemiesRed
0
0
0
0
#MHQuantum
Latest posts tagged with #MHQuantum on Bluesky
Trending
Posts tagged #MHQuantum
All #HeartPixiePots all day! By @3DPrintBunny
These are in @MatterHackers #MHQuantum in silver raspberry and blue raspberry.
Awesome design, easy print, love them!
0
0
0
0
Ok, here’s @MatterHackers #MHQuantum - the blue is quite a bit darker. It also appears to need different settings, as there are a couple places where there are some thick strings of filament hanging off. In one place it was due to a support failure
1
0
1
0
#InfiniteTentacle by @hex3d_design printed using @Polymaker_3D new dual colored #BelugaSilkBlueSilver
Next: same file/settings to compare Polymaker’s and @MatterHackers #MHQuantum blue/yellow. I’m really curious to see the similarities and differences. MH printing now 😸
0
0
1
0
More @cinderwing3D #Roseurtles @MatterHackers #MHQuantum @fulament #MattePurplePLA
Big one is 100%, then one at 65%, two at 55% one at 50% - this one scales down nicely
0
0
0
0
First up, @MatterHackers #MHQuantum dual-color co-extrusion filament.
The yellow is TOTALLY UV reactive! Shown here is pink/yellow and yellow/blue. Haven’t checked the other colors yet.
0
0
3
0
This is, by far, the best @MatterHackers #MHQuantum @cinderwing3 #BabyRoseDragon I have ever printed. I had a lot of trouble with it on the Ender, but @BambulabGlobal #X1Carbon printed this flawlessly at 70% in about 3 hours. Too bad camera feed dropped me from @MakerDeck
0
0
0
0
Now streaming on @MakerDeck - @cinderwing3 #BabyRoseDragon in @MatterHackers #MHQuantum in pink/yellow on the @BambulabGlobal #BambuX1Carbon https://www.twitch.tv/makerdeck
0
0
0
0
Now streaming live on @MakerDeck - #Mcgybeer #ArticulatedDragon in @MatterHackers #MHQuantum silver/purple https://www.twitch.tv/makerdeck
0
0
1
0
0
0
1
0
And now a 5cm version of the #SpiralVaseRose by @lyttamaker in @MatterHackers #MHQuantum yellow/pink, with stem printed in @Polymaker_3D #PolyLiteSilk in lime.
0
0
1
0
Another #SpiralVaseRose by @lyttamaker in @MatterHackers #MHQuantum yellow/pink - no twists this time! 💖💛
0
0
0
0
Back to the drawing board. @MatterHackers #MHQuantum REALLY does not like being retracted a lot. 🙀 #3DPrintFail
0
0
1
0
I continued my quest for good print settings by repeating using @PrusaSIicer instead of @Ultimaker #Cura - 1st attempt wasn’t pretty, but with some advice from @cinderwing3 discord, I got GREAT results. Have a #BabyRoseDragon going now in @MatterHackers #MHQuantum yellow/blue.
0
0
1
0
Gave my #3DPrinter a retraction stress test. First try, chewed through the filament. Tweaked settings, and got great result, considering size and layer height. Printed both at the same time to push it. @MatterHackers #MHQuantum #YellowBlue @cinderwing3 #DragonHeads
0
0
1
0
Something went awry with this one at the top 🤔
#CeresVase by @Clockspring3D in @MatterHackers #MHQuantum in silver raspberry
0
0
0
0
Murray says “hello, new fren.” #3DPrinting #ArticulatedDragon #MHQuantum #SnowshoeSiamese #ManyMoodsOfMurray
0
0
0
0
Ned to work on my settings a bit, she’s a bit rough. But still adorable #BabyRoseDragon by @cinderwing3 printed in @MatterHackers #MHQuantum in pink/yellow
1
0
2
0
Yet another #FlameVase by @martin_hawkes_1 in @MatterHackers #MHQuantum, purple/silver
Y’all getting sick of these yet? 😂
#3Dprinting #Ender3V2 @DGaylord3D
2
1
0
0
This was one of my first prints with @MatterHackers #MHQuantum - “elliptical vase”
The shape isn’t terribly practical but it is so pleasing to the eye and touch. Designer said not printable in PLA. Challenge accepted! .8mm nozzle, low layer height, no problem.
@DGaylord3D
0
0
0
0
This one is the sharp vase by @martin_hawkes_1 in #MHQuantum blue raspberry
@MatterHackers @DGaylord3D
0
0
0
0
Another of @martin_hawkes_1 designs, the Flame Vase in @MatterHackers #MHQuantum blue raspberry. I just want to print all the shiny things all the time.
@DGaylord3D
0
0
0
0
And @martin_hawkes_1 #LumpyBumpyVase isn’t ONLY awesome in @MatterHackers #MHQuantum , but also makes @Proto_pasta #Nebula #HTPLA shine 😍
0
0
0
0
@MatterHackers #MHQuantum in yellow/pink, @martin_hawkes_1 #LumpyBumpyVase as usual 😂.
#3DPrinting #Ender3V2 @DGaylord3D
0
0
0
0
@MatterHackers #MHQuantum in yellow/blue, @martin_hawkes_1 #LumpyBumpyVase of course. I just had to get a rotating display to properly show just how amazing this stuff is.
#3DPrinting #Ender3V2 @DGaylord3D
1
0
0
0
I’ve been making a #tinyRobotArmy lately, here are the latest additions. Once again using @MatterHackers #MHQuantum filament
0
0
1
0
0
0
0
0